Wind & Swell Exposure¶
These two indices give a relative measure of how exposed each water pixel is to wind-generated waves and to ocean swell. They are included in the PDF report and the downloadable results, but not on the web map, where the Effective Wave Height layer gives a more direct measure of wave conditions for mangrove establishment. They are used an inputs to calculating the effective wave height however.
- Wind wave exposure index — exposure to waves generated by local winds blowing over open water. This is also used for the exposure check in the Site Risk Summary.
- Swell exposure index — exposure to ocean swell arriving from open sea.
Both are calculated for all water pixels in the AOI, mapped at a high water level (pixels inundated in at least 2% of satellite scenes, the top of the intertidal zone).
The method used to calculate the exposure index is taken from Mason, L. A., et al. (2018), as recommended by the WWF Climate Smart Mangrove Tool.
Wind wave exposure index¶
Wind waves grow larger the stronger the wind and the longer the distance of open water it blows over (the fetch). The wind wave exposure index combines both: for each of 36 wind directions, the fetch in that direction is weighted by how often the wind blows from that direction and by its average squared wind speed, then summed. As fetch-limited wave height scales with wind speed times the square root of fetch, the index is proportional to the energy of locally generated waves.
- Low values indicate sheltered water, such as narrow creeks or areas protected by land in the direction of the strongest winds.
- High values indicate open water with long fetches in the direction of strong or frequent winds. On an open coast with 100 km of open water, values of around 3,000,000 m³/s² are typical.
The units (m³/s²) are not meaningful on their own as the index is intended for comparing areas within a site and between sites.
Swell exposure index¶
Swell is generated by distant storms and can arrive at a coast even when local winds are calm. The swell exposure index is the average offshore swell power (in kW per metre of wave crest) arriving from directions where the pixel has a straight, unobstructed line of sight to open sea.
- 0 indicates a location sheltered from all swell directions.
- Higher values indicate more exposure to swell. The maximum at a site is the average offshore swell power, which is reported in the overview table.
Methodology¶
Fetch is measured along straight lines (radials) from each pixel upwind to the first land, capped at 100 km (roughly the distance at which wind dominated waves may no longer dominate). The fetch is conservatively estimated by considering water distances at the high tide line within the AOI, and using land polygons for far field estimates.
Wind is the hourly ERA5 10 m wind over the last 5 complete calendar years, at the nearest offshore grid cell. Following Mason et al. (2018), this is summarised as the percentage of time and average speed of wind from each of the 36 directions.
Swell is the primary and secondary swell from the Copernicus Marine WAVERYS wave reanalysis over the same 5 years, at the nearest offshore wave model cell. The swell power arriving from each direction is estimated from the swell height and period. A direction is counted as open to swell by the fraction of radials within ±30 degrees that reach 100 km without meeting land.
The downloadable results also include:
| File | Description |
|---|---|
effective_fetch.tif |
Effective fetch (m), weighted by how often the wind blows from each direction (Mason et al., 2018) |
relative_exposure_index.tif |
Relative exposure index (m²/s): effective fetch weighted by wind frequency and average speed (Mason et al., 2018) |
exposure_water_mask.tif |
The water mask used for fetch (1 = water, 0 = land) |
wind_36bins.csv, wind_report.txt |
Wind summary by direction, and overall wind statistics |
swell_36bins.csv, swell_report.txt |
Swell summary by direction, and overall swell statistics |
Limitations & sources of error¶
- Relative indices. Neither index is a wave height. They are best used to compare areas, see Effective Wave Height for wave heights.
- Straight lines only. Swell bends around headlands or islands (refraction and diffraction) so sheltered areas behind headlands may have more swell than indicated.
- No bathymetry considered. Waves are attenuated significantly by shallow water and reefs, which may be the critical factors at many sites that shelter mangroves sufficiently for seedling establishment. This model does not factor in any bathymetric or other sheltering effects, and so overestimates the shore wave height.
- Coarse offshore data. Wind and swell come from a single offshore model cell which may not represent local conditions in complex coastlines or where wind is strongly affected by local topography such as mountains.
- High water level. Water is mapped at a high water level, so exposure is likely overestimated at lower tides, when more of the intertidal area is exposed land.
References¶
- Mason, L. A., Riseng, C. M., Layman, A. J. & Jensen, R. (2018). Effective fetch and relative exposure index maps for the Laurentian Great Lakes. Scientific Data, 5,
- https://doi.org/10.1038/sdata.2018.295
- Keddy, P. A. (1982). Quantifying within-lake gradients of wave energy: interrelationships of wave energy, substrate particle size and shoreline plants in Axe Lake, Ontario. Aquatic Botany, 14, 41–58.
- U.S. Army Corps of Engineers (1984). Shore Protection Manual.
- Copernicus Marine Service. Global Ocean Waves Reanalysis (WAVERYS), GLOBAL_MULTIYEAR_WAV_001_032.
- Hersbach, H. et al. (2020). The ERA5 global reanalysis. Quarterly Journal of the Royal Meteorological Society, 146(730), 1999–2049.
- OpenStreetMap contributors. Land polygons, https://osmdata.openstreetmap.de.
Exposure and mangroves¶
Mangroves generally grow in sheltered coastal areas, such as estuaries, lagoons and bays, or behind protective features such as reefs, sand spits or islands. Highly exposed areas are rarely suitable for mangrove establishment, as waves dislodge seedlings and erode sediment. These indices help identify the most sheltered parts of a site, and where exposure may be a barrier to restoration.